jointing Sheet NA-1005 teadit

Gasket Packing
jointing sheet NA 1005
Desciption and Applications
TEADIT style NA1005 is a compressed non-asbestos jointing-sheet material produced from Aramid fibres, bonded with Nitrile Rubber (NBR). It is being manufactured by means of a hot calender process under rigorous quality control standards which are registered under ISO 9001 certification.

Please note: the colour of the actual product might vary from the above image on this data-sheet.

Style NA1005 is indicated for air, brine, water, low pressure steam, organic and weak inorganic acids, diluted and concentrated alkalis, petroleum derivatives, synthetic and vegetable oils, aliphatic and chlorinated solvents, refrigerants, gases and chemical products in general.

Approvals
Germanischer Lloyd
KTW
ABS Certificate
Service Limits
Temperature (ºC)
Continuous Service: 240

Maximum Service: 400
Pressure (bar)
Continuous Service: 50

Maximum Service: 110
Availability (in mm)
1.500 x 1.600
1.500 x 3.200
Thickness (in mm)
0.5/1.0/1.5/2.0/2.5 and 3.0
Color
Green
Typical Physical Properties:
Density
app. 1,75 g/cm3
Compressibility - F36
7-17%
Recovery - ASTM F36
45%
Tensile Strength, Transverse - F152
11,5 N/mm2
Residual Stress - DIN 52913
28 N/mm2
Creep Relaxation - F38
25%
Sealability at 1000 psi - F37 A
0,25 ml/h
Thickness Increase - ASTM F146 - after 5hr

ASTM Oil Nr.3 @ 150ºC
12%
Fuel B, @ +21-29ºC
10%
Weight Increase - ASTM F146 - after 5hr

ASTM Oil Nr.3 @ 150ºC
15%
Fuel B, @ 21-29ºC
15%